3uF 250V 5% Matched Pair Russian Audiophile Grade Speaker Crossovers Capacitors

Description

Matched Pair
Order Tracking
Cheap Shipping
8.5 Grade
Humble Homemade Hifi Capacitors Test
AUDIO KIT STORE
DIY Loudspeaker & Amplifier Parts for Audio Enthusiasts
​​​​​​​​​​​​​​
Beat Mundorf MCap
and Jantzen Cross Cap​​​​​​​
​​​
very smooth
top end(c)
Ultra-High-Quality Japan made metallized polypropylene film TORAYFAN
Solid Aluminum Tubular Package; Tinned Plated Oxygen Free Pure Copper Axial Lead-wires
KZK K78-34 Russian Audio Capacitors
Audiophile Capacitors for DIY speaker crossovers and various signal applications. The audio grade capacitor K78-34 designed and built for you – the speaker builder. As a result, this film MKP capacitor falls right into the sweet spot of your buying decision.
particular audio design of KZK K78-34 is the result of an extensive research and development project by KZK brand (established 1958), which produces capacitors for military and oil industries;
K78-34 are built from
metallized polypropylene film
with heavy Al-Zn edges for low dissipation factor and provide superb sonic accuracy
and detail for any Hi Fi audio application, crossovers, stereo amplifiers, phono stages;
Ideal for building or repairing top quality loudspeaker crossover networks;
250VDC rating is excellent for new crossover networks or
replacing electrolytic capacitors
, allowing the capacitors to flawlessly handle large current peaks without distortion;
in contrast to traditional capacitor metal end spraying with Zn+ alloy, we use only ultra-pure Zn with special grain structure in order to eliminate parasitic effects in contact areas;
proprietary electrical and thermal treatment allows to get very stable parameters of audio capacitors and also gives natural musical tone without any harshness of high-order harmonics;
superior replacement for old/cheap/dried-up electrolytic/mkt capacitors in vintage/factory built speaker crossovers(JBL, Altec, Tannoy, Yamaha, Monitor Audio);
3uF 250V 5% Matched Pair Russian Audiophile Grade Speaker Crossovers Capacitors
Based on military tech.
Capacitance: 3uF
Voltage rating: 250VDC
Tolerance: 5%
Dimensions: 18mm D x 48mm L
Leads length: 25mm
Temperature range: -60 to +85°C
Dissipation factor: <0.002 @ 1kHz
Insulation Resistance: ≥ 100000 MΩ @ 20°C
Non-inductive construction
Non-polarized capacitor
Hermetically sealed body with green epoxy end caps
Recommended burn-in period: 30 hours
Not made in China
The pair is precisionly matched by DE-5000 LCR meter
​​​​​​​​​​​​​​Produced by Kuznetsk Capacitors Factory, Kuznetsk, Russia.
Payment
Shipping
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after buying, as that will allow us to post your item to you sooner!
Your order will be dispatched within 2 working days of receiving payment (Monday-Saturday) and you should expect to receive it 12-45 days Worldwide. Orders are professionaly packed and sent with tracking.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement as quickly as possible.
If you don't get the items for many days, please feel free to contact us, we will track the shipment and get back to you as soon as possible with a reply.
​​​​​​​Please Note:
Customs charges are the buyer's responsibility. They are not included in the item price or shipping cost. Please check with your country's customs office to determine what these additional costs will be prior buying.
Combined shipping discounts are available when you use the cart to make your purchase.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 60 days from the date you purchased it.
Any product you return must be in the same condition you received it.
100% Positive Feedback
Ideal Choice for
DIY Speaker kits
Best Offer
Discounts
See our other items
---Capacitance: 3uF ---Voltage rating: 250VDC ---Tolerance: 5% ---Dimensions: 18mm D x 48mm L ---Leads length: 25mm ---Temperature range: -60 to +85°C ---Dissipation factor: <0.002 @ 1kHz ---Insulation Resistance: ≥ 100000 MΩ @ 20°C ---Non-inductive construction ---Non-polarized capacitor ---Hermetically sealed body with green epoxy end caps ---Recommended burn-in period: 30 hours ---Not made in China
Matched Pair
Order Tracking
Cheap Shipping
AUDIO KIT STORE
DIY Loudspeaker & Amplifier Parts for Audio Enthusiasts
​​​​​​​​​​​​​​
Ultra-High-Quality Japan made metallized polypropylene film TORAYFAN
Solid Aluminum Tubular Package; Tinned Plated Oxygen Free Pure Copper Axial Lead-wires
KZK K78-34 Russian Audio Capacitors
3uF 250V 5% Matched Pair Russian Audiophile Grade Speaker Crossovers Capacitors
8.5 Grade
Humble Homemade Hifi Capacitors Test
Beat Mundorf MCap
and Jantzen Cross Cap​​​​​​​
​​​
very smooth
top end(c)
Audiophile Capacitors for DIY speaker crossovers and various signal applications. The audio grade capacitor K78-34 designed and built for you – the speaker builder. As a result, this film MKP capacitor falls right into the sweet spot of your buying decision.
particular audio design of KZK K78-34 is the result of an extensive research and development project by KZK brand (established 1958), which produces capacitors for military and oil industries;
K78-34 are built from
metallized polypropylene film
with heavy Al-Zn edges for low dissipation factor and provide superb sonic accuracy
and detail for any Hi Fi audio application, crossovers, stereo amplifiers, phono stages;
Ideal for building or repairing top quality loudspeaker crossover networks;
250VDC rating is excellent for new crossover networks or
replacing electrolytic capacitors
, allowing the capacitors to flawlessly handle large current peaks without distortion;
in contrast to traditional capacitor metal end spraying with Zn+ alloy, we use only ultra-pure Zn with special grain structure in order to eliminate parasitic effects in contact areas;
proprietary electrical and thermal treatment allows to get very stable parameters of audio capacitors and also gives natural musical tone without any harshness of high-order harmonics;
superior replacement for old/cheap/dried-up electrolytic/mkt capacitors in vintage/factory built speaker crossovers(JBL, Altec, Tannoy, Yamaha, Monitor Audio);
The pair is precisionly matched by DE-5000 LCR meter
Capacitance: 3uF
Voltage rating: 250VDC
Tolerance: 5%
Dimensions: 18mm D x 48mm L
Leads length: 25mm
Temperature range: -60 to +85°C
Dissipation factor: <0.002 @ 1kHz
Insulation Resistance: ≥ 100000 MΩ @ 20°C
Non-inductive construction
Non-polarized capacitor
Hermetically sealed body with green epoxy end caps
Recommended burn-in period: 30 hours
Not made in China
​​​​​​​​​​​​​​Produced by Kuznetsk Capacitors Factory, Kuznetsk, Russia.
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after buying, as that will allow us to post your item to you sooner!
Shipping
Your order will be dispatched within 2 working days of receiving payment (Monday-Saturday) and you should expect to receive it 12-45 days Worldwide. Orders are professionaly packed and sent with tracking.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement as quickly as possible.
If you don't get the items for many days, please feel free to contact us, we will track the shipment and get back to you as soon as possible with a reply.
​​​​​​​Please Note:
Customs charges are the buyer's responsibility. They are not included in the item price or shipping cost. Please check with your country's customs office to determine what these additional costs will be prior buying.
Combined shipping discounts are available when you use the cart to make your purchase.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 60 days from the date you purchased it.
Any product you return must be in the same condition you received it.
100% Positive Feedback
Best Offer
Discounts
Ideal Choice for
DIY Speaker kits
See our other items
Capacitance: 3uF
Voltage rating: 250VDC
Tolerance: 5%
Dimensions: 18mm D x 48mm L
Leads length: 25mm
Temperature range: -60 to +85°C
Dissipation factor: <0.002 @ 1kHz
Insulation Resistance: ≥ 100000 MΩ @ 20°C
Non-inductive construction
Non-polarized capacitor
Hermetically sealed body with green epoxy end caps
Recommended burn-in period: 30 hours
Not made in China